ページを印刷するUse the Bicycle
Foldable
armrest
②
Figure 2
1
Take R3 out of the package bag, unfold pedals and kickstand. Push the head in vertical direction (see
Figure 1 - ① arrow), the folding handle along with the bike head is to be down-and-backward to the
slot and then button up (see Figure 2- ② arrow) to fasten the head. Rotate the brake to horizontal (see
figure 5- ③ arrow), tighten the screws on the brake to fix brake (Figure 6- ④ arrow). Pull the safety pin
gently on the fixed seat of the battery box (see figure 3- ⑤ arrow), insert the battery box (see figure
3- ⑥ arrow), release safety pin and connect the wire as showed in Figure 4 .
2
Install the pedals correctly (L-left, R-right) as showed in Figure 7. Please note the installation of
screw tooth is the opposite. Install the left pedal anticlockwise and right pedal clockwise. 35~40N.m
is the recommended torque. Adjust the saddle height and install it (see Figure8- ⑦ arrow) and close
saddle's lifting rod lock (see Figure8- ⑧ arrow). Open the lifting rod lock and adjust the head height (see
Figure9- ⑨ arrow) and close saddle's lifting rod lock.
⑥
⑤
①
Figure 3
Figure 1
⑦
Figure 7
Motor
connecting line
Yellow
Safety pin
Figure 4
⑧
Figure 8
- 06 -
③
Black
Figure 5
Lifting rod
lock catch
④
Figure 6
⑨
Figure 9