- ページ 11
ネットワークカード Hi-Link HLK-RM04のPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。Hi-Link HLK-RM04 18 ページ。 Serial to ehthernet
Hi-Link HLK-RM04 にも： ユーザーマニュアル (5 ページ), アプリケーション・マニュアル (12 ページ)
ページを印刷する
Tes
Trst
8
Firmware upgrade
1. Restore the factory value.
2. Pc can connect with module through Ethernet, ip: 192.168.16.123/255.255.255.0. Browser
visits 192.168.16.254. Username / password: admin / admin.
3. Open the following page. Select the appropriate firmware, click apply upgrades. Wait a
3 minutes. Can not cut out the upgrade process, otherwise it may cause damage to the module.
9
Typical application network settings
This secti
on will give some simple examples to use the different functions of a typical
configuration.
9.1 Serial to Ethernet
1. Restore factory value setting.
2. Pc can connect with module through Ethernet, ip: 192.168.1
visits 192.168.16.254. Username / password: admin / admin.
3. Open the following page, click on the R
as below. Clicks APPLY to take effect.
100ms
5s
6.123/255.255.255.0. Browser
ADIO OFF button to turn off wifi function, shown
bout