Hi-Link HLK-RM04 Kullanıcı Kılavuzu - Sayfa 11

Ağ Kartı Hi-Link HLK-RM04 için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. Hi-Link HLK-RM04 18 sayfaları. Serial to ehthernet
Ayrıca Hi-Link HLK-RM04 için: Kullanıcı Kılavuzu (5 sayfalar), Uygulama Kılavuzu (12 sayfalar)

Sayfayı Yazdır
Hi-Link HLK-RM04 Kullanıcı Kılavuzu
Tes
Trst
8

Firmware upgrade

1. Restore the factory value.
2. Pc can connect with module through Ethernet, ip: 192.168.16.123/255.255.255.0. Browser
visits 192.168.16.254. Username / password: admin / admin.
3. Open the following page. Select the appropriate firmware, click apply upgrades. Wait a
3 minutes. Can not cut out the upgrade process, otherwise it may cause damage to the module.
9

Typical application network settings

This secti
on will give some simple examples to use the different functions of a typical
configuration.

9.1 Serial to Ethernet

1. Restore factory value setting.
2. Pc can connect with module through Ethernet, ip: 192.168.1
visits 192.168.16.254. Username / password: admin / admin.
3. Open the following page, click on the R
as below. Clicks APPLY to take effect.
100ms
5s
6.123/255.255.255.0. Browser
ADIO OFF button to turn off wifi function, shown
bout