- ページ 7

冷蔵庫 Gaggenau RB 292のPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。Gaggenau RB 292 19 ページ。
Gaggenau RB 292 にも：取扱説明書 (20 ページ)

Aligning the appliance

Place the appliance in the designated location and

align. The appliance must be level. If the floor is

uneven, use the front height-adjustable feet. Adjust

the height-adjustable feet with a wrench.

Note

The appliance must be upright. Please align it with a

spirit level.

After installing the appliance, wait at least 1 hour until

the appliance is switched on. During transportation

the oil in the compressor may have flowed into

the refrigeration system.

Before switching on the appliance for the first time,

clean the interior of the appliance (see chapter

"Cleaning the appliance").

The socket must be near the appliance and also freely

accessible following installation of the appliance.

The appliance complies with the protection class I.

Connect the appliance to 220–240 V/50 Hz

alternating current via a correctly installed socket with

protective conductor. The socket must be fused with

a 10 to 16 A fuse.

For appliances operated in non-European countries,

check whether the stated voltage and current type

match the values of your mains supply. These

specifications can be found on the rating plate.

Warning

Never connect the appliance to electronic energy

saver plugs.

Our appliances can be used with mains and sine-

controlled inverters. Mains-controlled inverters

are used for photovoltaic systems which

are connected directly to the national grid. Sine-

controlled inverters must be used for isolated

applications (e.g. on ships or in mountain lodges)

which are not connected directly to the national grid.