Gaggenau RB 292 Kullanım Kılavuzu - Sayfa 7
Buzdolabı Gaggenau RB 292 için çevrimiçi göz atın veya pdf Kullanım Kılavuzu indirin. Gaggenau RB 292 19 sayfaları.
Ayrıca Gaggenau RB 292 için: Kullanım Talimatları Kılavuzu (20 sayfalar)
Sayfayı Yazdır
Aligning the appliance
Place the appliance in the designated location and
align. The appliance must be level. If the floor is
uneven, use the front height-adjustable feet. Adjust
the height-adjustable feet with a wrench.
Note
The appliance must be upright. Please align it with a
spirit level.
Connecting the appliance
After installing the appliance, wait at least 1 hour until
the appliance is switched on. During transportation
the oil in the compressor may have flowed into
the refrigeration system.
Before switching on the appliance for the first time,
clean the interior of the appliance (see chapter
"Cleaning the appliance").
Electrical connection
The socket must be near the appliance and also freely
accessible following installation of the appliance.
The appliance complies with the protection class I.
Connect the appliance to 220–240 V/50 Hz
alternating current via a correctly installed socket with
protective conductor. The socket must be fused with
a 10 to 16 A fuse.
For appliances operated in non-European countries,
check whether the stated voltage and current type
match the values of your mains supply. These
specifications can be found on the rating plate.
m
Warning
Never connect the appliance to electronic energy
saver plugs.
Our appliances can be used with mains and sine-
controlled inverters. Mains-controlled inverters
are used for photovoltaic systems which
are connected directly to the national grid. Sine-
controlled inverters must be used for isolated
applications (e.g. on ships or in mountain lodges)
which are not connected directly to the national grid.
7