- ページ 4

電動おもちゃの車 73RC 73TENのPDF 組立マニュアルをオンラインで閲覧またはダウンロードできます。73RC 73TEN 6 ページ。 1/10th scale competition on-road chassis kit

Step 4

FH Screw 3x5mm

CH Screw 2x6mm

* Clip on side links first, then align centre pivot and tighten the 3x5mm screw. Now adjust the pivot block

to ensure the pod moves freely in all directions before tightening the two outer screws. Do not

overtighten - just snug! Finally, fit 2x6mm screws to side links - again do not overtighten, ensure they

rotate on the balls freely.

BAG 3

Step 1

Ball Stud 4.3x6mm

Lock Nut 3mm

BH Screw 3x10mm

* Please take note of Damper Brace hole placement, refer to the diagram below for an explanation. (Ball

studs and lock nuts are included in the full kit only).

73TEN 235mm Chassis