- ページ 11

農機具 GREAT PLAINS BD7600のPDF フィールド調整マニュアルをオンラインで閲覧またはダウンロードできます。GREAT PLAINS BD7600 12 ページ。 Box drill
GREAT PLAINS BD7600 にも：クイック・スタート・マニュアル (20 ページ)

5) Position the center transport lift handle (1) down in

ROAD position to lock the transport lock (2) in the

latch (3).

6) Slowly retract the fold cylinders. Completely fold

wing frames until both wing gauge wheel pins (4) are

secured by the latches (5).

7) The drill is now ready for transport.

How To Unfold The Drill:

Note: The drill must be left raised in transport lift with

openers raised before unfolding.

1) Park the tractor and drill on level ground with

enough clearance to unfold the drill. Put the tractor in

park.

2) Set the selector valve to TRANSPORT LIFT.

3) Check that the transport lift circuit is still raised and

the transport lock is engage.

4) Make sure the openers are still raised and locked

up with the lock handles in ROAD position.

5) Rotate the latch (1) up. Hold up the latch with the

swing arm (2). Slowly unfold the wings by completely

extending the fold cylinders.

on the latches, adjust the springs momentarily on the

latches to release.

Note: If there is pressure

11 of 12

49646

49647

Document

#DRUS400C-0012A