GREAT PLAINS BD7600 Посібник з польових налаштувань - Сторінка 11
Переглянути онлайн або завантажити pdf Посібник з польових налаштувань для Сільськогосподарське обладнання GREAT PLAINS BD7600. GREAT PLAINS BD7600 12 сторінок. Box drill
Також для GREAT PLAINS BD7600: Посібник із швидкого старту (20 сторінок)
Друкувати сторінку
5) Position the center transport lift handle (1) down in
ROAD position to lock the transport lock (2) in the
latch (3).
6) Slowly retract the fold cylinders. Completely fold
wing frames until both wing gauge wheel pins (4) are
secured by the latches (5).
7) The drill is now ready for transport.
How To Unfold The Drill:
Note: The drill must be left raised in transport lift with
openers raised before unfolding.
1) Park the tractor and drill on level ground with
enough clearance to unfold the drill. Put the tractor in
park.
2) Set the selector valve to TRANSPORT LIFT.
3) Check that the transport lift circuit is still raised and
the transport lock is engage.
4) Make sure the openers are still raised and locked
up with the lock handles in ROAD position.
5) Rotate the latch (1) up. Hold up the latch with the
swing arm (2). Slowly unfold the wings by completely
extending the fold cylinders.
on the latches, adjust the springs momentarily on the
latches to release.
Note: If there is pressure
11 of 12
49646
49646
49647
49647
Document
#DRUS400C-0012A