- ページ 2

自転車アクセサリー 76 PROJECTS ASSBAGのPDF 組み立てをオンラインで閲覧またはダウンロードできます。76 PROJECTS ASSBAG 2 ページ。 Anti strap system top tube bag

BAG SLIDER - BAG SIDE

Align bracket with ﬂat edge toward the

front.

Insert spine washer inside bag.

Puncture through chosen holes and

install screws using allen key.

BIKE SLIDER - BIKE SIDE STICK ON

APPLY IN A WARM, DRY ENVIRONMENT. ENSURE SURFACES & HANDS ARE GREASE FREE.

HAIR DRYER. MEASURE TWICE, STICK ONCE! CURE FOR 24 HOURS.

Apply adhesive pad ﬁrmly

Slide onto bag.

pressing all areas.

(Removal may require alot of force)

BIKE SLIDER - BIKE SIDE DIRECT MOUNT

Push out hole plugs using a blunt tool.

Secure in place using supplied

screws and 3mm allen key.

Place on bike. Mark a line.

Mark a centre line on top

tube.

Slide bracket off (may require alot of force)

For non uniform and narrow

tubes we advise to hold in

place with tape whilst

curing.

REMOVE BY GENTLY HEATING WITH A

Peel back ﬁlm, align front

edge and press ﬁrmly.

Ensure alignment, pull

away the rest of the ﬁlm

and press ﬁrmly.