ページを印刷する
Usage
Leg Extensions
To adjust the height, depress the snap button and slide the leg extensions and H-frame leg assembly up
or down to obtain correct height.
Note: Make sure that all leg extensions and the H-frame assembly are adjusted to the same height and the
snap buttons are engaged into the holes ensuring they are locked into place.
Suction Cups
Rinse and dry the suction cups prior to use to remove any dust, etc. Clean, rinse and dry the smooth
flat flooring surface which they are intended to stick to (removing any mineral deposits, soap scum, etc.)
Press each individual suction cup into the smooth flooring surface. To move the unit with suction cup
option, break the seal of the suction cup first by lifting on the lip of the cup to allow air to get into it.
Back
To remove the back, depress the double latch snap button on the back tubes and pull upward.
Armrests
To remove the arms, depress snap button on the arm(s) and pull upward.
Benches
Short Transfer Bench: To adjust the transfer bench support extensions, rotate up or down.
Make sure both are adjusted to the same height.
Ensure they contact the tub edge surface to provide weight bearing support when sliding across during
transfers.
B-O Transfer Bench: To adjust height of the transfer bench, on the support extensions depress the snap
button and slide support extension either up or down to obtain correct height.
Make sure both are adjusted to the same height.
Turn bench upright and insert ends into the receiver of the frame or back assembly (as applicable).
7