ページを印刷する
7. If the arms were ordered, line up the arm with the
receivers of the frame or back assembly. Insert the end of
the rear of the arm into the receiver on the rear of the seat
frame or back assembly.
Note, the proper orientation is the overhang of the arm
pad(s) should go to the outside of the unit.
8. Insert the front of the arm into the receiver on the front
of the seat frame. Depress snap button to secure the arm
into the frame.
Repeat for second arm if both arms were ordered.
9. If the short transfer bench was ordered, insert the round
tubes of the transfer bench bracket into the receiver of the
frame or back assembly and snap button in, to remove flip
lever on the bottom of the tubes to release.
Snap Pin in
5
Flip Lever
7.
8.
9.