ActiveAid 202 Kullanıcı El Kitabı - Sayfa 8

Tekerlekli Sandalye ActiveAid 202 için çevrimiçi göz atın veya pdf Kullanıcı El Kitabı indirin. ActiveAid 202 12 sayfaları.

7. If the arms were ordered, line up the arm with the

receivers of the frame or back assembly. Insert the end of

the rear of the arm into the receiver on the rear of the seat

frame or back assembly.

Note, the proper orientation is the overhang of the arm

pad(s) should go to the outside of the unit.

8. Insert the front of the arm into the receiver on the front

of the seat frame. Depress snap button to secure the arm

into the frame.

Repeat for second arm if both arms were ordered.

9. If the short transfer bench was ordered, insert the round

tubes of the transfer bench bracket into the receiver of the

frame or back assembly and snap button in, to remove flip

lever on the bottom of the tubes to release.

Snap Pin in

Flip Lever