- ページ 6

おもちゃ GREAT PLANES F-86 SabreのPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。GREAT PLANES F-86 Sabre 12 ページ。 Arf plane

PREPARE THE TTX402 TRANSMITTER

For more information on the Tactic Radio System included

with the F-86 Sabre visit tacticrc.com

Push in and slide to

remove the battery door.

The landing gear is required for takeoffs and landings on

smooth, paved surfaces such as your ﬂ ying ﬁ eld runway or

a parking lot. The gear should be left off if you plan to hand

launch the plane and land it on grass.

Carefully insert the main wire landing gear into the plastic

gear mounts in the orientation shown.

Leave the TTX402

unpowered.

Install (5)

"AA" batteries.

Replace the

battery door.

Slide the gear into the mounts until the small bent end of the

gear base contacts the tab on the gear mounts.

Install the nose gear wire in the same manner.

When removing the gear, slide the wire straight out of the gear

mounts until free. Pull the gear out at the base of the wire and

work slowly to avoid damaging the plane.

POWER THE TTX402 AND

CENTER THE TRIMS

Keep the left stick

(throttle control) in the

minimum throttle

position during setup.

Center the rudder, aileron,

and elevator trims.

Power switch "ON" .

TRIM ADJUSTMENT

Full extent............. Centered ........... Full extent

Constant «beep» .....Single «beep» ..... Constant «beep»

Illuminated red light indicates the

TTX402 is powered and transmitting.