- ページ 4

セキュリティシステム ADEMCO TI110B1のPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。ADEMCO TI110B1 18 ページ。 Gsm/pstn dual network burglar alarm system

ページを印刷する

card. And the program cell phone will receive "7-22392288*0001/". It means that the arming

report to alarm center has been stored successfully.

you use program cell phone to edit "8888*78*22392288*0001" to GSM SIM

For example 2:

card. And the program cell phone will receive "8-22392288*0001/". It means that the disarming

report to alarm center has been stored successfully.

Note: the program cell phone is default to be the No.0 group of number when it logs in alarm

panel successfully. But it cannot receive alarm information when it is the No.0 group. But if you

want the program cell phone to receive the alarm information, you should store it into any other

group of number.

5. Check /Delete all the Alarm Receiving Number

You can use the program cell phone to edit "888888*71*", and send it to the GSM SIM card. On

receiving the command message, the alarm panel will send all the alarm receiving numbers to the

program cell phone in the form of SMS. And all the alarm receiving numbers will be display.

Demonstration: 1—13XXXXXXXXX (the 1

2—13XXXXXXXXX (the 2

Delete Alarm Receiving Number:

You can use the program cell phone to edit "888888*7

the 2

group of number will be deleted. Similarly, you can use this way to delete other group of

number

6. Alarm Location

This GSM alarm system can inform you of the alarm location in the form of SMS when alarming,

and you are allowed to prestore/check/cancel all the alarm location.

(1) Store the Alarm Location: you can use the program cell phone to edit "888888*41*the alarm

location" and send it to the GSM SIM card. On receiving this message, the GSM SIM card

will reply you a message with the content of alarm location, which means that you have store

the alarm location successfully. (Note: the number of characters of alarm location cannot

exceed 40)

(2)

Check the Alarm Location: if you want review the alarm location that you have prestore,

you can use the program cell phone to edit "888888*41*" and send it to the GSM SIM card.

On receiving this message, the alarm panel will reply you a message with the content of alarm

location for your review.

(3)

Cancel the Alarm Location

7. Remote Arming/Disarming Operation Password

Set: Use program cell phone to edit "888888*21*XXXX" and send it to GSM SIM card. And

(1)

the program cell phone will receive such a message "XXXX" (Remote Operation Password). It

means that the remote arming/disarming password is set successfully.

Inquiry: Use program cell phone to edit "888888*21*" and send it to GSM SIM card. And

(2)

the program cell phone will get the operation password

(3) Delete: Use program cell phone to edit "888888*21#" and send it to GSM SIM card. And the

alarm receiving number)

#", and send it to the GSM SIM card. And

: you can edit "

888888*41#

" to cancel the alarm location.