- ページ 8

計測機器 GREAT PLANES MASTER CADDYのPDF 組立説明書をオンラインで閲覧またはダウンロードできます。GREAT PLANES MASTER CADDY 15 ページ。 With auxiliary power station

C 20. Tape APS upright B onto the second upright so

that itis centered between side A and side C and resting

on the bottom. Tape or hold a ruler along the side of the

slot in the APS upright.

the top edge of both holes in the APS upright. This is

where the screws will go to hold the APS in place.

aD sth

(

22. Drill a 1/8" diameter hole where you made your

marks. You can leave the APS uprightin place while you

drill the holes, to help keep them centered. Screw the #8

x 5/8" screws into the holes but leave them extended

enough so you can remove the

APS upright by raising it up so

the screw heads pass through the

holes.

APS CONSTRUCTION

APS Upright B

"ii

Bottom

C 1. Glue the APS upright B to the APS bottom.

The upright should be lined up with the back edge of the

APS bottom, and you should use one of the APS sides

to keep the upright perpendicular.

O 2. Use the APS shelf and the 1/2" Dowel APS

Handle to position APS upright A and tack glue the

upright in place. It should be lined up with the edges of

the APS bottom.

Remove the APS shelf and apply a generous

bead of glue along both sides of the joint to securely glue

upright A in place.