GREAT PLANES MASTER CADDY Montagehandleiding - Pagina 8
Blader online of download pdf Montagehandleiding voor {categorie_naam} GREAT PLANES MASTER CADDY. GREAT PLANES MASTER CADDY 15 pagina's. With auxiliary power station
Pagina afdrukken
C 20. Tape APS upright B onto the second upright so
that itis centered between side A and side C and resting
on the bottom. Tape or hold a ruler along the side of the
slot in the APS upright.
the top edge of both holes in the APS upright. This is
where the screws will go to hold the APS in place.
4
aD sth
(
22. Drill a 1/8" diameter hole where you made your
marks. You can leave the APS uprightin place while you
drill the holes, to help keep them centered. Screw the #8
x 5/8" screws into the holes but leave them extended
enough so you can remove the
APS upright by raising it up so
the screw heads pass through the
holes.
APS CONSTRUCTION
APS Upright B
<
"ii
Bottom
C 1. Glue the APS upright B to the APS bottom.
The upright should be lined up with the back edge of the
APS bottom, and you should use one of the APS sides
to keep the upright perpendicular.
O 2. Use the APS shelf and the 1/2" Dowel APS
Handle to position APS upright A and tack glue the
upright in place. It should be lined up with the edges of
the APS bottom.
O
3.
Remove the APS shelf and apply a generous
bead of glue along both sides of the joint to securely glue
upright A in place.