- ページ 8
セキュリティシステム ADEMCO VISTA 5140XMのPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。ADEMCO VISTA 5140XM 15 ページ。 Commercial fire & burglary alarm system
ページを印刷するBURGLARY ALARM SYSTEM OPERATION
(IF INSTALLED)
ARMING PERIMETER ONLY
STAY: STAYING INSIDE, EXPECTING LATE ARRIVALS
INSTANT: STAYING INSIDE, NO LATE ARRIVALS EXPECTED
PROCEDURE
1. Enter the security code when the
Ready message is displayed.
2. Press the STAY [3] or INSTANT [7]
key, depending on arming mode
desired.
STAY KEY RESULT
Arms sensors guarding doors and
windows, with entry delay on. Late arrivals
can enter through the entry delay zone
door and disarm the system within the
entry delay period without causing an
alarm. See your installer for actual delay
times set for your system. Alarms will occur
instantly when any exterior protection point
is violated, except the entry delay zone
door, which will activate an alarm if the
system is not disarmed within the entry
delay period. Interior protection points are
disarmed to permit freedom of movement
throughout the interior.
– 14 –
3. The armed state message will be
displayed, accompanied by three
beeps from the Console. Exit delay
begins [if programmed, a slow beeping
will sound throughout the exit delay
period]. Perimeter protection is in effect
immediately, except entry delay zone if
STAY key is pressed.
INSTANT KEY RESULT
Arms sensors guarding doors and
windows, with entry delay off. Alarms will
occur instantly when any exterior
protection point is violated, including the
entry delay zone door. Interior protection
points are disarmed to permit freedom of
movement throughout the interior.
BURGLARY ALARM SYSTEM OPERATION
(IF INSTALLED)
ARMING ALL PROTECTION
AWAY: NO ONE INSIDE
MAXIMUM: NO ONE STAYING INSIDE, MAXIMUM SECURITY
PROCEDURE
1. Enter the security code when the
Ready message is displayed.
2. Press the AWAY [2] or MAXIMUM [4]
key, depending on arming mode
desired.
AWAY KEY RESULT
Arms all perimeter and interior sensors,
with entry delay on. You may exit during
the exit delay period and reenter through
the entry delay zone door (and disarm the
system within the entry delay period)
without causing an alarm.
See your
installer for actual delay times set for your
system. Alarms will occur instantly when
any protection point, interior or exterior, is
violated, except the entry delay zone door
if AWAY key pressed, which will activate
an alarm if the system is not disarmed
within the entry delay period.
3. The armed state message will be
displayed, accompanied by two beeps
from the Console. Exit delay begins [if
programmed, a slow beeping will
sound throughout the exit delay
period]. Complete system protection is
in effect immediately, except entry
delay zone if AWAY key is pressed.
MAXIMUM KEY RESULT
Arms all perimeter and interior sensors,
with entry delay off. You may exit during
the exit delay period, BUT alarms will
trigger instantly upon reentering, or when
any protection point, interior or exterior, is
violated. This mode is suggested when the
premises will be vacant for extended
periods of time such as vacations, etc., or
when no one will be moving through
protected interior areas.
– 15 –