- ページ 3

コントローラー Celec 98MDCのPDF マニュアルをオンラインで閲覧またはダウンロードできます。Celec 98MDC 9 ページ。 Mdi-controller

MDI-CONTROLLER

98MDC

GENERAL WORKING

1. Display Rising Demand & Maximum Demand / KVA / Clock

Press

Key Display shows

Press

Key Display show

Again press

Any combination with running demand can be set as per set customer requirement.

2. Display kW and kVA

press

key Display shows average of 3 phase KW & kVA.

Press

key R phase LED glows and Display shows R phase kW & kVA.

Again Press

Caution:-

On Load Check the KW on each phase R, Y, B by using scroll.

If Display shows

3. Display Date and Time

Press

key display show Real Time Clock (RTC) and Date.

4. To Reset Alarm

If Alarm1 or Alarm2 is energize, Press

Alarm1 and Alarm2 reset and Alarm1 and Alarm2 LED's are blinking in reset mode.

5. To Reset Trip

After to reset the alarm1 or Alarm2 press

Maximum (Target) Demand (MD) and Rising Demand (RD).

s Rising Demand (RD) and running load (in kVA)

Key Display shows

Rising Demand (RD) and Internal Clock Time.

key Y phase LED glows and Display shows Y phase kW & kVA.

key B phase LED glows and Display shows B phase kW & kVA

in any phase then interchange S1 & S2 of the phase which show

Current is below than minimum kW sensitivity

key to reset both the Alarm.

key to reset Trip.

User Manual