- ページ 12

水ポンプ HIBLOW hp-200のPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。HIBLOW hp-200 17 ページ。 Air pumps
HIBLOW hp-200 にも：取扱説明書 (13 ページ), マニュアル (8 ページ)

(11) After the diaphragm mounting blocks have been installed, ﬁx the new casing blocks by tightening

the four screws evenly in the reverse order to that done for disassembling, ﬁt the L-tube in the

casing nozzle, and ﬁx it ﬁrmly using the hose band. (Figs.21 and 22).

Fig. 21

Screw

(12) When all the reassembly work has been completed, check the rod for no contact with the

electromagnet(s) or the screws for tightness.

(13) As a ﬁnal step, put the frame cover back on the frame, tighten the four screws uniformly, then

cover the frame with the sound absorber. Furthermore, do not forget to put the frame cover on,

tighten each of four screws gradually and uniformly until they are ﬁrmly fastened.

• Tightening a single screw too tight will make it difﬁcult to tighten the remaining screws ﬁrmly, result-

ingin damage to the screws if forcibly tightened. Therefore, fasten all the four screws uniformly.

Fig. 23

Fig. 22

CAUTION

Fig. 24

Sound absorber

Hose band

(Figs. 23 and 24)

Screw