HIBLOW hp-200 사용 설명서 - 페이지 12

{카테고리_이름} HIBLOW hp-200에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. HIBLOW hp-200 17 페이지. Air pumps
HIBLOW hp-200에 대해서도 마찬가지입니다: 사용 설명서 (13 페이지), 매뉴얼 (8 페이지)

페이지 인쇄

(11) After the diaphragm mounting blocks have been installed, ﬁx the new casing blocks by tightening

the four screws evenly in the reverse order to that done for disassembling, ﬁt the L-tube in the

casing nozzle, and ﬁx it ﬁrmly using the hose band. (Figs.21 and 22).

Fig. 21

Screw

(12) When all the reassembly work has been completed, check the rod for no contact with the

electromagnet(s) or the screws for tightness.

(13) As a ﬁnal step, put the frame cover back on the frame, tighten the four screws uniformly, then

cover the frame with the sound absorber. Furthermore, do not forget to put the frame cover on,

tighten each of four screws gradually and uniformly until they are ﬁrmly fastened.

• Tightening a single screw too tight will make it difﬁcult to tighten the remaining screws ﬁrmly, result-

ingin damage to the screws if forcibly tightened. Therefore, fasten all the four screws uniformly.

Fig. 23

Fig. 22

CAUTION

Fig. 24

Sound absorber

Hose band

(Figs. 23 and 24)

Screw