- ページ 7

アンプ DaytonAudio DTA-100STのPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。DaytonAudio DTA-100ST 8 ページ。 100w desktop stereo amplifier with bluetooth 5.0

ページを印刷する
DaytonAudio DTA-100ST ユーザーマニュアル

Installing Mounting Brackets

The DTA-100ST can be conveniently mounted on or underneath a shelf or desk
with the included mounting brackets. The brackets can be attached to the sides of
the amplifier by removing the screws and replacing them with the brackets in place.
IMPORTANT! DO NOT BLOCK VENTS!
DTA-100ST
Shelf

Specifications

Maximum Power Output (Peak) .............. 100W/CH @ 4Ω
RMS Power Output .................................. 45W/CH @ 4Ω
Total Gain ................................................. 27.5 dB
THD+N ...................................................... <0.06% at rated power output
Frequency Response .............................. 25 Hz – 20,000 Hz
Input Sensitivity ....................................... 215 mV
Channel Separation ................................. 70 dB
Minimum Speaker Impedance ................ 4Ω
Signal to Noise Ratio ............................... 101 dB
Bluetooth .................................................. 5.0
General
Power Requirement ................................. 100-240V, 50/60 Hz
Standby Power Consumption ................ 2W
Amplification ............................................ Class D
Dimensions (W, H, D) .............................. 7.5 x 2 x 5.5 in. (190 x 50 x 139 mm)
Weight ....................................................... 2.78 lbs. (1.26 kg)
All Specifications are accurate at the time of printing.
Dayton audio reserved the right to make improvements without notice.
7