DaytonAudio DTA-100ST 사용자 설명서 - 페이지 7
{카테고리_이름} DaytonAudio DTA-100ST에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. DaytonAudio DTA-100ST 8 페이지. 100w desktop stereo amplifier with bluetooth 5.0
페이지 인쇄
Installing Mounting Brackets
The DTA-100ST can be conveniently mounted on or underneath a shelf or desk
with the included mounting brackets. The brackets can be attached to the sides of
the amplifier by removing the screws and replacing them with the brackets in place.
IMPORTANT! DO NOT BLOCK VENTS!
DTA-100ST
Shelf
Specifications
Maximum Power Output (Peak) .............. 100W/CH @ 4Ω
RMS Power Output .................................. 45W/CH @ 4Ω
Total Gain ................................................. 27.5 dB
THD+N ...................................................... <0.06% at rated power output
Frequency Response .............................. 25 Hz – 20,000 Hz
Input Sensitivity ....................................... 215 mV
Channel Separation ................................. 70 dB
Minimum Speaker Impedance ................ 4Ω
Signal to Noise Ratio ............................... 101 dB
Bluetooth .................................................. 5.0
General
Power Requirement ................................. 100-240V, 50/60 Hz
Standby Power Consumption ................ 2W
Amplification ............................................ Class D
Dimensions (W, H, D) .............................. 7.5 x 2 x 5.5 in. (190 x 50 x 139 mm)
Weight ....................................................... 2.78 lbs. (1.26 kg)
All Specifications are accurate at the time of printing.
Dayton audio reserved the right to make improvements without notice.
7