- ページ 18

シグナルブースター HiBoost F10G-CPのPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。HiBoost F10G-CP 20 ページ。 Cellular 3g signal booster

There are certain cases where your system could be experiencing

oscillation. This can be attributed to either the quality of your input

signal or having your outdoor antenna and indoor antenna too close

together. Please review the following guidelines to help resolve this

issue:

1. Adjust the direction of the outdoor antenna. If the system is

receiving a very high input signal, you can point your outdoor

antenna away from the cellular tower to reduce the strength of the

input signal and therefore, reduce the oscillation. Alternatively if

your system is receiving a very poor quality signal (weak and

unusable signal), you can point your outdoor antenna more directly

towards the cellular tower to increase the strength of the input signal.

Sometimes this may require completely repositioning the antenna to

a location where you can achieve a line of site to the tower.

2. Increase the separation between the outdoor antenna and the

indoor antenna. This can be achieved by increasing the distance

between the two antennas or by placing barriers between them,

such as moving the indoor antenna to an adjacent room where there

would be an additional wall separating them from the outdoor

antenna.

3. Manual Gain Control. Adjust the gain with the manual gain control

function using the dip switches on the side of the booster.