HiBoost F10G-CP Kullanıcı Kılavuzu - Sayfa 18
Sinyal güçlendirici HiBoost F10G-CP için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. HiBoost F10G-CP 20 sayfaları. Cellular 3g signal booster
Sayfayı YazdırThere are certain cases where your system could be experiencing
oscillation. This can be attributed to either the quality of your input
signal or having your outdoor antenna and indoor antenna too close
together. Please review the following guidelines to help resolve this
issue:
1. Adjust the direction of the outdoor antenna. If the system is
receiving a very high input signal, you can point your outdoor
antenna away from the cellular tower to reduce the strength of the
input signal and therefore, reduce the oscillation. Alternatively if
your system is receiving a very poor quality signal (weak and
unusable signal), you can point your outdoor antenna more directly
towards the cellular tower to increase the strength of the input signal.
Sometimes this may require completely repositioning the antenna to
a location where you can achieve a line of site to the tower.
2. Increase the separation between the outdoor antenna and the
indoor antenna. This can be achieved by increasing the distance
between the two antennas or by placing barriers between them,
such as moving the indoor antenna to an adjacent room where there
would be an additional wall separating them from the outdoor
antenna.
3. Manual Gain Control. Adjust the gain with the manual gain control
function using the dip switches on the side of the booster.