- ページ 12

コーヒーメーカー Emeril Lagasse RETROのPDF オーナーズマニュアルをオンラインで閲覧またはダウンロードできます。Emeril Lagasse RETRO 16 ページ。 Espresso machine

Care & Maintenance

Cleaning

1. Unplug the appliance and let it completely cool down.

2. Clean the exterior surfaces and the steam nozzle with a slightly damp cloth and then dry them

thoroughly. Make sure that no water enters the product interior (for example, through the

control lever opening). The steam nozzle tip can be removed by pulling it downwards and it can

then be washed separately.

3. Remove the portafilter and sieve and empty out the coffee grounds. Wash under running water

and dry thoroughly.

4. Wipe the area on the machine where the portafilter fits.

5. Empty the drip tray when you have finished using the machine, or when the drip tray full

indicator pops up.

Use the cleaning tool to unblock the openings in the portafilter.

The steam nozzle, sieves, drip tray and drip tray cover can be cleaned in a dishwasher.

Descaling

After approximately 500 cycles, the light will show red indicating that the unit should be descaled.

This is a warning and will not affect coffee making but the light will remain red until it is reset after

descaling the appliance.

Over time, calcium deposits or "scale" may build up in your brewer. Scale is non-toxic, but if left

unattended, can hinder brewer performance and cause premature failure. Regularly descaling your

machine helps to maintain beverage quality, as well as the lifespan of the heating element, and other

internal parts that come in contact with water throughout the brew process.

A full cleaning with vinegar is recommended once a month. More frequent cleanings may be

required in areas with higher water hardness. If using a proprietary descaling product, follow the

manufacturer's instructions.

1. Pour fresh water and the specified amount of decalcifier into the water tank. Use a 50/50 mix

when using a vinegar solution.

2. Repeatedly start the brewing process and also use the 'hot water' process to clean the steam

nozzle and internal components.

3. Do this until the water tank is empty. If necessary, repeat this process.

4. After descaling, rinse the product several times by brewing water with no coffee to remove any

decalcifier residue.

5. To reset the light, turn the unit on ( F ) then rotate the steam/hot water control knob

conterclockwise and back to the off ( A ) position twice within 5 seconds while the unit is

preheating.

EM0042-0BL_29601_E_IB_A.indd 12

1/31/23 3:56 PM