- ページ 9

電話 GAI-Tronics TitanのPDF インストールとユーザーマニュアルをオンラインで閲覧またはダウンロードできます。GAI-Tronics Titan 14 ページ。 Illuminated crossing telephone

4. Ensuring that the cable entries are at the bottom, offer the rear enclosure up

to a vertical surface and mark through the punched holes. Do not use the

backplate as a template to drill the holes, work only from the marked

positions. Be careful not to damage the plastic washers.

Drill the required number of holes in the vertical surface to the

appropriate depth to suit the best possible method of fixing.

5. Ensure that all four plastic flanged bushes are in place and the rear

enclosure is screwed tightly to the surface to prevent any water incursion

through the punched holes.

IMPORTANT: DO NOT use countersunk headed fixing screws. Only use

either round head, hexagon head or pan head screws provided.

6. Insert the cable through the gland body and screw down the gland nut

sufficient to clamp the cable and make a seal.

Titan Illuminated Crossing Telephone

Figure 7 – Knocking out plastic bushes

Figure 8 – Plastic bush knockout