GAI-Tronics Titan Instrukcja instalacji i obsługi - Strona 9
Przeglądaj online lub pobierz pdf Instrukcja instalacji i obsługi dla Telefon GAI-Tronics Titan. GAI-Tronics Titan 14 stron. Illuminated crossing telephone
Drukuj stronę
4. Ensuring that the cable entries are at the bottom, offer the rear enclosure up
to a vertical surface and mark through the punched holes. Do not use the
backplate as a template to drill the holes, work only from the marked
positions. Be careful not to damage the plastic washers.
Drill the required number of holes in the vertical surface to the
appropriate depth to suit the best possible method of fixing.
5. Ensure that all four plastic flanged bushes are in place and the rear
enclosure is screwed tightly to the surface to prevent any water incursion
through the punched holes.
IMPORTANT: DO NOT use countersunk headed fixing screws. Only use
either round head, hexagon head or pan head screws provided.
6. Insert the cable through the gland body and screw down the gland nut
sufficient to clamp the cable and make a seal.
Titan Illuminated Crossing Telephone
Figure 7 – Knocking out plastic bushes
Figure 8 – Plastic bush knockout
7