- ページ 4

ネットワーク・ルーター Dynalink RTA1335のPDF クイック・セットアップ・マニュアルをオンラインで閲覧またはダウンロードできます。Dynalink RTA1335 16 ページ。 Adsl2+ 4-port modem router
Dynalink RTA1335 にも：パンフレット＆スペック (3 ページ)

ページを印刷する

Connection of this router to computers is via Ethernet, independent of the

Operating System. There is no driver to load.

This router comes with a built-in 4-port network switch. Up to 4 computers can

be connected to the router directly. If you require connections for more computers,

purchase another network hub and connect it to the router to provide for more

connections. Only one Ethernet cable is provided. Extra cables and network hub

can be purchased from your supplier.

Connecting the router

1. Connect the DSL port of the router directly into your ADSL jackpoint (telephone

wall socket) with the provided line cord. Do not connect through a filter,

unless the filter has a designated MODEM port for this purpose.

2. Connect the Ethernet port of your computer to any one of the ETHERNET ports

(1-4) on the router using the Ethernet cable provided.

3. Connect the provided AC/AC power adaptor to the Power jack of the router.

Plug the adaptor into a mains power outlet. Switch on the router. In normal

operation these lights shall be on: POWER, DSL, ETHERNET. Section 9 of this

Guide explains how these indicator lights work.

Getting computer ready for networking

You have two options. Following option 1 is easiest. This is the Windows default

network setting.

OPTION 1

If your computer is already configured to obtain an IP address automatically (from

a DHCP server), do nothing. By default the router is a DHCP server and will assign

an IP to the computer automatically. Now go to Section 5 – Getting On-Line.

OPTION 2

The router's default address is 192.168.1.1. If you prefer to assign an IP address

manually, the default can be changed from the router's Advanced > Local Network

> IP Address menu.

If you are unsure of your computer's network setting, refer to Chapter 2 – System

Requirement & Installation of the User's Manual. Pages 5-15 contain information

on Setting TCP/IP for different versions of Windows. If you choose to follow

option (1) above, consult the section Configure PC to get IP address from DHCP

on pages 16-18.

After configuring your computer, go to Section 5 – Getting On-line.

CONFIGURE COMPUTER TO GET IP ADDRESS

MANUALLY ASSIGN IP ADDRESS TO COMPUTER