Dynalink RTA1335 Manual de configuração rápida - Página 4

Procurar online ou descarregar pdf Manual de configuração rápida para Router de rede Dynalink RTA1335. Dynalink RTA1335 16 páginas. Adsl2+ 4-port modem router
Também para Dynalink RTA1335: Brochura e especificações (3 páginas)

Connection of this router to computers is via Ethernet, independent of the
Operating System. There is no driver to load.
This router comes with a built-in 4-port network switch. Up to 4 computers can
be connected to the router directly. If you require connections for more computers,
purchase another network hub and connect it to the router to provide for more
connections. Only one Ethernet cable is provided. Extra cables and network hub
can be purchased from your supplier.
3

Connecting the router

1. Connect the DSL port of the router directly into your ADSL jackpoint (telephone
wall socket) with the provided line cord. Do not connect through a filter,
unless the filter has a designated MODEM port for this purpose.
2. Connect the Ethernet port of your computer to any one of the ETHERNET ports
(1-4) on the router using the Ethernet cable provided.
3. Connect the provided AC/AC power adaptor to the Power jack of the router.
Plug the adaptor into a mains power outlet. Switch on the router. In normal
operation these lights shall be on: POWER, DSL, ETHERNET. Section 9 of this
Guide explains how these indicator lights work.
4
Getting computer ready for networking
You have two options. Following option 1 is easiest. This is the Windows default
network setting.
OPTION 1
If your computer is already configured to obtain an IP address automatically (from
a DHCP server), do nothing. By default the router is a DHCP server and will assign
an IP to the computer automatically. Now go to Section 5 – Getting On-Line.
OPTION 2
The router's default address is 192.168.1.1. If you prefer to assign an IP address
manually, the default can be changed from the router's Advanced > Local Network
> IP Address menu.
If you are unsure of your computer's network setting, refer to Chapter 2 – System
Requirement & Installation of the User's Manual. Pages 5-15 contain information
on Setting TCP/IP for different versions of Windows. If you choose to follow
option (1) above, consult the section Configure PC to get IP address from DHCP
on pages 16-18.
After configuring your computer, go to Section 5 – Getting On-line.
CONFIGURE COMPUTER TO GET IP ADDRESS
MANUALLY ASSIGN IP ADDRESS TO COMPUTER