- ページ 7

録音機器 Gainlab Audio GL-TC1のPDF マニュアルをオンラインで閲覧またはダウンロードできます。Gainlab Audio GL-TC1 16 ページ。 Dictator stereo vari-m compressor

compression, the refraction curve of which is also much more angular. This

mode is especially recommended for sound design purposes, as well as on

buses and tracks where you want to make the dynamics control audible

speciﬁcally. At a high threshold value, it is used for buses intended to be coarser-

sounding, and for tracks whose saturation and thickening may be necessary for

mixing. In BYPASS mode, the device galvanically connects its outputs and inputs,

so we can always check the sound of the compression compared to the original

signal. To select the operating mode, turn the switch clockwise until the rotary

selector points in the direction of the desired operating mode.

TIME CONSTANT - ATTACK

to set a slower procedure, or turn it clockwise to set a faster procedure. As it

is an electron tube circuit, the time constants are diﬃcult to express in an

exact way. The following table helps to determine the approximate time of

the ATTACK parameter:

FASTEST

FAST

SLOW

SLOWEST

TIME CONSTANT - RELEASE

DICTATOR STEREO VARI-μ COMPRESSOR

The sound we hear during compression is basically

determined by the speed of the time constants,

which in most cases will result from the nature of the

program signal.

The time constant marked ATTACK can be used to

determine how long it takes for the compressor to

reach the maximum of its intervention range when

approaching the set intervention threshold level. To

change the speed at which the procedure rises,

turn the switch labeled ATTACK counterclockwise

15ms

25ms

40ms

60ms

! 6