Gainlab Audio GL-TC1 Podręcznik - Strona 7
Przeglądaj online lub pobierz pdf Podręcznik dla Sprzęt nagrywający Gainlab Audio GL-TC1. Gainlab Audio GL-TC1 16 stron. Dictator stereo vari-m compressor
Drukuj stronę
!
compression, the refraction curve of which is also much more angular. This
mode is especially recommended for sound design purposes, as well as on
buses and tracks where you want to make the dynamics control audible
specifically. At a high threshold value, it is used for buses intended to be coarser-
sounding, and for tracks whose saturation and thickening may be necessary for
mixing. In BYPASS mode, the device galvanically connects its outputs and inputs,
so we can always check the sound of the compression compared to the original
signal. To select the operating mode, turn the switch clockwise until the rotary
selector points in the direction of the desired operating mode.
TIME CONSTANT - ATTACK
to set a slower procedure, or turn it clockwise to set a faster procedure. As it
is an electron tube circuit, the time constants are difficult to express in an
exact way. The following table helps to determine the approximate time of
the ATTACK parameter:
FASTEST
FAST
SLOW
SLOWEST
TIME CONSTANT - RELEASE
!
DICTATOR STEREO VARI-μ COMPRESSOR
The sound we hear during compression is basically
determined by the speed of the time constants,
which in most cases will result from the nature of the
program signal.
The time constant marked ATTACK can be used to
determine how long it takes for the compressor to
reach the maximum of its intervention range when
approaching the set intervention threshold level. To
change the speed at which the procedure rises,
turn the switch labeled ATTACK counterclockwise
15ms
25ms
40ms
60ms
! 6