Gainlab Audio GL-TC1 Podręcznik - Strona 9

Przeglądaj online lub pobierz pdf Podręcznik dla Sprzęt nagrywający Gainlab Audio GL-TC1. Gainlab Audio GL-TC1 16 stron. Dictator stereo vari-m compressor

Gainlab Audio GL-TC1 Podręcznik
!
Due to the nature of the equipment, the higher the gain reduction value, the
higher the compression ratio. To adjust the threshold level, turn the knob
labeled THRESHOLD clockwise to set the lower threshold level, or turn the knob
counterclockwise to set the higher threshold level.

CHANNEL LINK/UNLINK

be advantageous to eliminate the coexistence of the two channels. In this case, it
is possible to separate the auxiliary circuits of the device. To separate the
auxiliary circuits, use the switch once and check on the lower indicator lights
that the compressor is in the desired operating condition. Use the switch
again to return to linked mode.

SIDECHAIN FILTER

allow a signal to go to the auxiliary circuit.
!
DICTATOR STEREO VARI-μ COMPRESSOR
The Dictator is set to two-channel mode by
default. In such cases, the aim is for the right
and left channels to run together as much as
possible. However, in certain situations, it may
Depending on the program signal, it is often necessary for
the dynamics controller not to react to deep frequency
components. In such cases, it is advisable to filter out
these low-frequency components from the auxiliary
circuit signal controlling the compressor with a high-pass
filter that does not allow a signal to the control circuit
below a set cut-off frequency.
To set the filter, turn the switch labeled SIDECHAIN
FILTER so that the rotary knob points towards the cut-
off frequency value below which you no longer want to
! 8