- ページ 3

アンプ Gainlab Audio BISHOPのPDF マニュアルをオンラインで閲覧またはダウンロードできます。Gainlab Audio BISHOP 15 ページ。
Gainlab Audio BISHOP にも：クイック・スタート・マニュアル (10 ページ)

■

If the device has been exposed to rain or other moisture,

■

If the device does not operate normally

■

Do not connect the appliance to a mains socket to which an

electrical appliance controlled by an inverter, switching power

supply (eg. refrigerator, washing machine, microwave, air

conditioner) or a appliance with a motor is connected.

■

Depending on the use of the electrical devices, power supply

noises may cause a malfunction or audible noise on this unit. If a

separate electrical outlet cannot be used, connect a noise ﬁlter

between this and the other electrical appliance.

■

The unit heats up during several hours of continuous

operation. This is normal and not a cause for concern.

■

Turn off all devices before connecting the device to other devices.

This will prevent damage to speakers and other equipment.

■

Use of the unit near ampliﬁers or other equipment that contains a

transformer may cause noise. To resolve this issue, relocate the

device or move it away from the interfering device.

■

Noise may be caused by using a wireless communication device

near the device, such as a mobile phone. Such noise can occur

when making, receiving, and diverting a call. If you experience this

problem, move the wireless device away from the device or turn it

off.

■

This unit may interfere with radio and television operation, so do

not use near such receivers.

■

If the device is transported to a location with a very different

temperature and / or humidity, moisture may condense inside.

Using the device in this condition may result in damage or

malfunction. Therefore, wait a few hours for the moisture to

completely evaporate before using the appliance.

CLEANING AND MAINTENANCE

Clean the appliance daily with a soft, dry or slightly damp cloth. Use a

soft, abrasion-free cloth to remove stubborn dirt. Then wipe the device

with a dry cloth. Never use benzine, thinner, alcohol or other solvents,

strong alkaline or acidic cleaners as they may cause discoloration and

deformation.