- ページ 6

アンプ Gainlab Audio BISHOPのPDF マニュアルをオンラインで閲覧またはダウンロードできます。Gainlab Audio BISHOP 15 ページ。
Gainlab Audio BISHOP にも：クイック・スタート・マニュアル (10 ページ)

Switching between the High and Low sections is indicated by the scale

illumination and the High and Low LEDs. There is an overlap between the

selectable gain values on the High and Low scale. Due to the structure of the

preampliﬁer, the sound is different even if the same gain value is selected on the High or

Low scale.

PREAMPLIFIER ADDITIONAL FUNCTIONS

Phantom Power: It can turn on the +48V voltage which

is required for the operation of speciﬁc types of

condenser microphones. The +48V only appears on

microphone inputs. To activate the function, turn the function switch to

the right position. The ON position is indicated by an LED.

Some types of microphones can be damaged if they are exposed to +48V. Always check if

phantom power is required for the particular microphone. Before connecting or removing

a microphone, always turn off the phantom voltage function!

PAD: It lowers the gain of microphone input by -20dB. This may be

necessary for certain sources, or useful for performing certain

sound design tasks. To activate the function, turn the switch to the

upper position. Activation of the function is indicated by an LED.

Phase: Reverses the phase of the entire system. This can be useful when

recording with multiple microphones or when using Bishop in

combination with other devices. To activate the function, turn the

switch to the upper position. Activation of the function is indicated

by an LED.

THE ONBOARD DUAL SLOPE OPTICAL COMPRESSOR

An integral part of the preampliﬁer section is an optical compressor

with two break-off points instead of one. Thus, it

provides signiﬁcantly greater conﬁdence and

ﬂexibility in recording situations. If you want to

access the compressor functions, put the Optical