- ページ 2

望遠鏡 Celestron ASTROMASTER LT 70 AZのPDF クイック・セットアップ・マニュアルをオンラインで閲覧またはダウンロードできます。Celestron ASTROMASTER LT 70 AZ 8 ページ。

Unpack your telescope and verify that all parts are present.

Your AstroMaster LT 70AZ includes: a telescope tube, a

tripod and mount head, two eyepieces, a StarPointer™ Red

Dot Finderscope, an Star diagonal, a smartphone adapter, and

Bluetooth shutter remote.

All three legs should be the same length to provide a level

platform for the telescope.

Here is how the fully assembled tripod and mount

should appear.

#22109

To set up the tripod, spread the legs outward until they

are fully extended. Extend each of the three tripod legs

down 6-12".

To attach the accessory tray, line up notches and turn clock-

wise until tray tabs lock into place with the tripod brackets.

Next, slide telescope tube into the mount. Be sure to back out

fastening screws to allow enough clearance for the dovetail.

Use the three tightening screws located at the bottom of each

leg to secure the extended legs in place.

Properly assembled, the accessory tray should appear as

pictured above.

Center dovetail in the mount and tighten fastening screw. For

added security tighten the angled lock down screw next to the

fastening screw.