- ページ 6

照明器具 89 North PhotoFluor II NIRのPDF 交換マニュアルをオンラインで閲覧またはダウンロードできます。89 North PhotoFluor II NIR 8 ページ。 Lamp replacement

STEP 4

Tabs (2x)

Retaining

wires (2x)

Lamp power cable in

upright (12 o'clock)

position

Lamp power connector

STEP 5

STEP 6

Rev B

INSTALL NEW BULB

While holding the white ceramic lamp base (Note:

do not touch reflector surfaces), place the new

lamp flush against the lamp mount's recessed

circular opening. The lamp power cable that

connects to the rim of the lamp must be placed in

the upright (12 o'clock) position. See Figure 3.

Try to move the lamp side to side to assure it is

properly seated in the recessed circular opening.

Figure 3: Top view of lamp chamber

ENGAGE the metal retaining wire and place them

within the tabs. The "spring action" wire will secure

the lamp in place.

CONNECT the lamps power cable (brown

connector). See Figures 3 & 4.