89 North PhotoFluor II NIR 교체 매뉴얼 - 페이지 6

{카테고리_이름} 89 North PhotoFluor II NIR에 대한 교체 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. 89 North PhotoFluor II NIR 8 페이지. Lamp replacement

STEP 4

Tabs (2x)

Retaining

wires (2x)

Lamp power cable in

upright (12 o'clock)

position

Lamp power connector

STEP 5

STEP 6

Rev B

INSTALL NEW BULB

While holding the white ceramic lamp base (Note:

do not touch reflector surfaces), place the new

lamp flush against the lamp mount's recessed

circular opening. The lamp power cable that

connects to the rim of the lamp must be placed in

the upright (12 o'clock) position. See Figure 3.

Try to move the lamp side to side to assure it is

properly seated in the recessed circular opening.

Figure 3: Top view of lamp chamber

ENGAGE the metal retaining wire and place them

within the tabs. The "spring action" wire will secure

the lamp in place.

CONNECT the lamps power cable (brown

connector). See Figures 3 & 4.