- ページ 4
エアクリーナー Airdog X3 KJ200F-X3のPDF マニュアルをオンラインで閲覧またはダウンロードできます。Airdog X3 KJ200F-X3 7 ページ。
ページを印刷する
Display and Air Quality Indicator Instruction
Green:
Excellent
PM2.5 ≤ 35ug/m
3
Yellow Green:
Good
35ug/m
< PM2.5 ≤ 75ug/m
3
3
Yellow:
Moderately Polluted
75ug/m
< PM2.5 ≤ 150ug/m
3
3
Red:
Hazardous
PM2.5 > 150ug/m
3
PM2.5 numbers are calculated based on the real time particle numbers in some air volume according to United States Environmental
Protection Agency(EPA). The numbers could be affected by the air flow speed, air purifier position and ambient environment.
Concentration of PM2.5
Displays concentration of PM2.5
when it is properly functioning.
Wind Speed Indicator
L1-L4, slow to fast.
Cleaning Reminder
Displays when collecting plates
need to be washed.
Faulty Reminder
When "9XX" appears on the display，and
power indicator is blinking, clean the unit
and make sure to put every part back
correctly and make solid contact. Please
move to the Full Cleaning Cycle section for
more cleaning details.
If "9XX" is still on the display after
cleaning, please contact customer service
for further help.
Collecting Plates Cleaning
1. We recommend you to clean the collecting plates when the air purifier display "
2. Cut the power, open the back shroud and pull out the collecting plates ( Pic 1 ) .
3. Follow the Pic 2 and Pic 3.
a. Slide to separate the seat and collecting part.
b. Separate the upper collecting part and bottom collecting part to wash.
4. Dry the collecting plates after cleaning ( recommend over 24 hrs ).
5. Put back the collecting plates in the direction of labeling.
6. Long press Operation Button to clear "
" and reset.
Upper collecting part
Bottom collecting part
Pic 1
".
Collecting part
Seat
Pic 2
Pic 3