- ページ 2

ウェザーステーション Celestron 47007のPDF 使用説明書をオンラインで閲覧またはダウンロードできます。Celestron 47007 15 ページ。 Large format lcd personal weather station with wireless remote sensor
Celestron 47007 にも：ユーザーマニュアル (3 ページ)

ページを印刷する

If the battery power becomes low, a "low battery icon" will appear on the LCD display and change

batteries to ensure a strong signal is being sent to the Receiver.

Settings and Operation of the Receiver

is for setting normal time to a ± 12 hour difference.

•

Temperature Alert – you can set a range of indoor and outdoor temperature alerts (high and

low). In normal mode press the "ALERT" button once and it will display an icon that the alert is

enabled (to the left of the indoor and outdoor temperature) and press again and the icon will be

removed to indicate the alert is disabled. To set the

maximum and minimum temperatures for the alert, hold

the "ALERT" button down for a few seconds and a icon

(top part) will flash to tell you to set the maximum

temperature alert – use the "UP" and "DOWN" arrow

buttons to choose your alert indoor temperature and push

the "ALERT" button to set. Push the button again and

lower icon will flash and to set the minimum indoor

temperature alert. Do the same setup again but when the top icon is flashing with no temperature

show push the UP arrow button to make the settings for the outdoor temperature. When the

temperature reaches the alarm stage, the icons will flash and make a sound.

•

Indoor & Outdoor Temperature & Humidity

– the indoor temperature and humidity as well as

the outdoor temperature and humidity is shown

on the LCD display.

•

Data displayed in "C" or "F" – push the

"DOWN" arrow button (when in a normal

mode) to change from "C" (Centigrade) or "F"

(Fahrenheit) for the display you desire.

•

Clock & Calendar – Press the "MODE" button

and hold down for a couple of seconds to enter

the setup mode. Use the "+" or "-" buttons to

make changes. Press the "MODE" after each

setting is correct. The settings in sequence will

be – hour / minute / seconds / year / month / day

/ time zone / weekday language / exit. The

weekday language to choose is available

English, German, French, Spanish, Italian,

Dutch, and Danish.

•

The clock format can be 12 or 24 hour mode –

use the "+" button (in normal mode) to change

the format that you wish to use. The time zone