- ページ 2
湿らせる Airdog AirH001のPDF クイック・スタート・マニュアルをオンラインで閲覧またはダウンロードできます。Airdog AirH001 2 ページ。
ページを印刷するInstallation
Open the box and packages,the Airdog mistfree
evaporative humidifier is ready to use by simply adding water.
Add Water
1.Remove the cover. Add water as shown in the below picture.
2.Add water into the tank directly from the outlet, no need to remove the cover.
3.Remove the cover and add water into the tank.
max
upper limit
1
2
Do not add water over the max line.
Operation
Operation with remote controller
max
upper limit
max
upper limit
3
Ambient light ON/OFF
UV light ON/OFF
Smart mode setting
Quiet operation mode
Power ON/OFF
Display ON/OFF
Speed level up
Speed level down
Operation with front panel
Display panel
Smart mode/Ambient light control button
Short press: Switch among manual or smart mode levels.
At smart mode,the humidifier will change the speed according to
the set humidity level. Run the smart mode with the target humidity level,
set it by cycle through 50,55,60,65,70,75,80 or OFF smart mode.
Long press (2s): Turn on/off ambient light.
Attention: Pour the water out from the corner which marked "Pour Water Here".
Current humidity level in %
No water reminder
UV ON/OFF
Speed Level
Low speed: Fixed 3 bars
High speed: Fixed 6 bars
Smart mode: Change from 1 bar to 6 bar
and cycle through.
Pour Water
Here