Airdog AirH001 Краткое руководство по эксплуатации - Страница 2

Просмотреть онлайн или скачать pdf Краткое руководство по эксплуатации для Увлажнить Airdog AirH001. Airdog AirH001 2 страницы.

Installation

Open the box and packages,the Airdog mistfree

evaporative humidifier is ready to use by simply adding water.

Add Water

1.Remove the cover. Add water as shown in the below picture.

2.Add water into the tank directly from the outlet, no need to remove the cover.

3.Remove the cover and add water into the tank.

max

upper limit

Do not add water over the max line.

Operation

Operation with remote controller

max

upper limit

max

upper limit

Ambient light ON/OFF

UV light ON/OFF

Smart mode setting

Quiet operation mode

Power ON/OFF

Display ON/OFF

Speed level up

Speed level down

Operation with front panel

Display panel

Smart mode/Ambient light control button

Short press: Switch among manual or smart mode levels.

At smart mode,the humidifier will change the speed according to

the set humidity level. Run the smart mode with the target humidity level,

set it by cycle through 50,55,60,65,70,75,80 or OFF smart mode.

Long press (2s): Turn on/off ambient light.

Attention: Pour the water out from the corner which marked "Pour Water Here".

Current humidity level in %

No water reminder

UV ON/OFF

Speed Level

Low speed: Fixed 3 bars

High speed: Fixed 6 bars

Smart mode: Change from 1 bar to 6 bar

and cycle through.

Pour Water

Here