- ページ 3

プロジェクターアクセサリー Celexon ExpertのPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。Celexon Expert 20 ページ。 Electric ceiling recessed projection screen
Celexon Expert にも：インストレーション・マニュアル (2 ページ), インストレーション・マニュアル (2 ページ), 取扱説明書 (9 ページ)

•

Children should not use the screen or play under it unsupervised.

•

Caution: Risk of injury! The unit closes flush and firmly, keep fingers, hands or other

small parts away from the opening.

•

All supply lines and cables must not be subjected to additional loads and must be

laid in such a way that they are not damaged or crushed.

•

Failure to observe the above instructions may result in personal injury and damage

to the product or equipment connected to it. Incorrect installation or use may also

invalidate the warranty.

•

If you are unsure about the use of the product, please contact your

specialist personnel, your dealer or celexon directly (Web: www.celexon.co.uk, Mail:

•

Technical changes and errors excepted.

The manufacturer accepts no responsibility for damage to property or personal

injury, if the screen is used outside the recommended specifications, or in the event of

improper installation. Do not use this screen in the vicinity of heaters or air conditioners.

Also, do not mount the product in direct sunlight or in front of a window. Due to the

temperature-sensitive PVC surface, the projection screen fabric may be permanently

damaged.

We recommend that you wait approx. 2 hours after delivery before installing the

projection screen. This will allow the screen to acclimatise, especially if it is moved from

a cold to a warm environment or vice versa.

Please avoid any stains on the surface of the canvas. These may not be able to be

removed.

The positions of the end points are already optimally set at the factory and should not

be changed. Especially with motorised screens, the entire length of the fabric should

always be used in order to achieve the best flatness. An adjustment of a few cm of the

end switch-off points should only be made by persons with specialist knowledge and in

consultation with the manufacturer. Incorrect adjustment can result in damage to the

projection surface.