Celexon Expert 사용 설명서 - 페이지 3
{카테고리_이름} Celexon Expert에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Celexon Expert 20 페이지. Electric ceiling recessed projection screen
Celexon Expert에 대해서도 마찬가지입니다: 설치 매뉴얼 (2 페이지), 설치 매뉴얼 (2 페이지), 사용 설명서 (9 페이지)
페이지 인쇄
•
Children should not use the screen or play under it unsupervised.
•
Caution: Risk of injury! The unit closes flush and firmly, keep fingers, hands or other
small parts away from the opening.
•
All supply lines and cables must not be subjected to additional loads and must be
laid in such a way that they are not damaged or crushed.
•
Failure to observe the above instructions may result in personal injury and damage
to the product or equipment connected to it. Incorrect installation or use may also
invalidate the warranty.
•
If you are unsure about the use of the product, please contact your
specialist personnel, your dealer or celexon directly (Web: www.celexon.co.uk, Mail:
•
Technical changes and errors excepted.
The manufacturer accepts no responsibility for damage to property or personal
injury, if the screen is used outside the recommended specifications, or in the event of
improper installation. Do not use this screen in the vicinity of heaters or air conditioners.
Also, do not mount the product in direct sunlight or in front of a window. Due to the
temperature-sensitive PVC surface, the projection screen fabric may be permanently
damaged.
We recommend that you wait approx. 2 hours after delivery before installing the
projection screen. This will allow the screen to acclimatise, especially if it is moved from
a cold to a warm environment or vice versa.
Please avoid any stains on the surface of the canvas. These may not be able to be
removed.
The positions of the end points are already optimally set at the factory and should not
be changed. Especially with motorised screens, the entire length of the fabric should
always be used in order to achieve the best flatness. An adjustment of a few cm of the
end switch-off points should only be made by persons with specialist knowledge and in
consultation with the manufacturer. Incorrect adjustment can result in damage to the
projection surface.
2