- ページ 7

プロジェクターアクセサリー Celexon HomeCinema CLR USTのPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。Celexon HomeCinema CLR UST 12 ページ。 Electric floor high contrast screen
Celexon HomeCinema CLR UST にも：取扱説明書 (11 ページ)

ページを印刷する

Fix the frame by screwing the four screws (Q) into each L-Bracket. Make

sure that as soon as one bracket is fi xed you do the diagonally opposite

bracket next.

Fig 7.

Insert the support strut (L) to the

centre of the length of the frame

(according to fi g. 8) and fi x it

with the screws to the connec-

ting bracket (I).

Carefully turn the assembled frame over with 2 people, so that the

connecting brackets (J) are on top. Screw the screws (O) into the

connecting brackets and tighten them. Make sure that you always tigh-

ten the opposite side fi rst. Then tighten the screws on the inside with the

Allen key (S)

Fig 9.

Please note: During the last frame assembly steps, it must be ensured

that all frame parts are mitred to ﬁ t and tightened. If there are small

gaps in the mitre, the cover frame cannot ﬁ t ﬂ ush and unsightly joints

will appear in the frame corners. As soon as you ﬁ nd small gaps in the

mitre, loosen all fasteners and connecting brackets, push the frame

parts together and gradually re-tighten the loosened components.

Fig 8.