ページを印刷する5. How to start milling
1. Fill the hopper with the desired grain.
2. Put a proper bowl underneath the spout for the flour to fall into. Turn on
„MT 12" and make sure the flour does not back up into the spout.
3. Stop and restart the milling process as desired by using the power switch.
Interrupting the milling process:
When the hopper is full of very hard berries like corn, rice or winter wheat, it
can prevent the motor from starting in the finest setting. Should the motor be
blocked turn the adjusting knob to a coarser setting until the motor starts to
turn and readjust while in operation to the desired finer setting. When milling
very hard grain or corn do not interrupt the milling process.
Performance:
The mill is designed for amounts used in private households. When larger
quantities of flour are milled it will eventually get warm. If operated for longer
periods of time, the built in safety switch may shut off the motor automatically
until the motor has cooled down. After cooling the switch automatically turns
the motor back on. The automatic shut off is not as effective when empty, so
please do not attempt this for longer periods of time.
8