- ページ 13
電動工具 909 ID182のPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。909 ID182 20 ページ。 18v impact driver/ wrench 9.5mm (3/8") socket drive 6.35mm (1/4") drive adaptor lithium-ion
ページを印刷するBattery Indicator Under No-load
Red
Yellow
LED
LED
ON
ON
ON
ON
ON
OFF
OFF
OFF
OFF
ON
Battery indicator
Fully depress the trigger switch
and allow the wrench to run at full
unloaded speed. Review the 3
coloured lights located on the foot
of the wrench. The table above
explains the levels of charge (low,
medium and high).
Green
Battery status
LED
indicator/description
ON
High: Battery is fully charged
OFF
Medium: Battery has less than 50% charge capacity.
OFF
Low: Battery has less than 30% charge capacity.
OFF
Faulty battery pack
OFF
High temperature. The battery pack temperature is too high and needs to be
cooled down.
Note:
In this condition the battery will not operate the wrench or recharge.
Once the battery pack has cooled down to an appropriate level the battery will
be suitable to for reuse or recharging. If the task is being carried on with the
cooled down battery you must first reduce the load being applied to the wrench,
which would have caused the overheating of the pack (use a new wrench bit or
sharpen the wrench bit and allow the bit to do the cutting and reduce the amount
of force placed on the wrench).
If the battery pack cools down and the status remains unchanged then the
battery pack is defective/damaged and should not be used.
WARNING:
Never use a damaged battery pack.
13