- ページ 4

メディア・コンバーター DYNAPAR HS35IQ SeriesのPDF インストレーション・マニュアルをオンラインで閲覧またはダウンロードできます。DYNAPAR HS35IQ Series 7 ページ。 Heavy duty hollowshaft encoder

STEP 10:

Basket Guard Installation (optional)

After installation of the encoder place the accessory cover over the

encoder with the large opening over the connector or cable and

shorter opening positioned over the tether. Ensure the cover is fully

seated on the motor face and secure with bolts and washers provided.

When mounting to a fan cover instead of a 56C face cover, center cover

and drill 3 mounting holes(0.17") in diameter. Then use the 3 #10-24

self tapping screws and washers provided. Install the warning label in

the most conspicious position. Snap guard is to be used as shown

(use if required).

Application Assistance 1.800.873.8731 (847.662.2666) Option 3

Page 4