DYNAPAR HS35IQ Series Посібник з монтажу - Сторінка 4
Переглянути онлайн або завантажити pdf Посібник з монтажу для Конвертер мультимедіа DYNAPAR HS35IQ Series. DYNAPAR HS35IQ Series 7 сторінок. Heavy duty hollowshaft encoder
Друкувати сторінкуSTEP 10:
Basket Guard Installation (optional)
After installation of the encoder place the accessory cover over the
encoder with the large opening over the connector or cable and
shorter opening positioned over the tether. Ensure the cover is fully
seated on the motor face and secure with bolts and washers provided.
When mounting to a fan cover instead of a 56C face cover, center cover
and drill 3 mounting holes(0.17") in diameter. Then use the 3 #10-24
self tapping screws and washers provided. Install the warning label in
the most conspicious position. Snap guard is to be used as shown
(use if required).
Application Assistance 1.800.873.8731 (847.662.2666) Option 3
Page 4