- ページ 4

ブックレットメーカー Galaxy Print Finishing VR-930のPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。Galaxy Print Finishing VR-930 15 ページ。

ページを印刷する

Assembly & Safety:

1. Place your new Galaxy VR-930 Booklet Maker on top of a sturdy

working table.

2. Plug the power cord into the back of the machine.

3. To reduce the risk of electric shock, do not operate the booklet maker

near water.

4. Do not use the booklet maker if the power cord is damaged.

5. Do not allow the electric cord to be in contact with hot surfaces.

6. In case of malfunction, return the unit back to your distributor for service.

This equipment does not contain any part that can be serviced by the

consumer or operator.

Operation Instructions

1. Keep fingers, hair, jewlery, neck tie and any loose clothing or objects away

from the mahcine, as they mmay be accidentally pulled inside.

2. As part of its safety features, the booklet maker is equipped with sensors in

various places of the machine. As a result, the machine will not work when the

cover is open, the paper is not in postion and no staple is inside the Stapler

Head.

3. Clean the machine by a soft and damp cloth only. Never use chemical or

alcohol base liquids as they may damage the rubber rollers or the surface of

the machine.

4. Lubricate the machine from time to time following the illustration below

(lubricant is included in the tools drawer).

5. Only use our standard staples as others may damage the booklet maker.

Electricity:

115VAC/ 60Hz

230VAC/ 50Hz

Tools & Accessories delivered with this machine:

1 Universal

1 bottle of

Wrench (works

lubricant.

as a Stapler

Head screw

driver,

staples picker

and staples

remover.

2 Staple

1 box of our

Pushers for

standard

spare

staples, 26/6,

replacement.

5000 pcs

per box.