- ページ 6

ブックレットメーカー Galaxy Print Finishing VR-930のPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。Galaxy Print Finishing VR-930 15 ページ。

Moving the Staple Heads:

Follow the steps below if you wish to remove or install the Staple Heads at

different positions:

A. Turn the latch counter-clockwise to position 1 to unlock the Staple Head.

Unplug the cord socket from the Staple Head.

B. Remove the Staple Head and insert it in a different Staple Head position.

C. Make sure the hole on the Staple Pusher is hinged onto the pin, and the

mark "26" on the Staple Pusher is shown towards the rear of the machine.

Turn the latch clockwise to lock it, and plug in the cord socket back to the

Staple Head.

IMPORTANT:

aa. To avoid problems during the operation, the hole of the Staple Pusher

must be hinged onto the pin, with the mark "26" shown towards the rear of the

machine.

bb. The latch must be securely locked onto the Staple Head. Otherwise, the

Staple Head may fall out during the operation and cause the machine to be

seriously

Tips to remove jammed staples from Staple Heads:

Repeat the above steps to remove the Staple

Head from the machine and then use the Universal

Wrench to unscrew the front plate of the Staple Head.

Remove the jammed staples and clean it. Screw the

front plate back onto the Staple Head. Repeat the

above steps to install the Staple Head back to the

machine.

Tips to replace new Staple Pusher:

The Staple Pusher should be replaced from time

to time to ensure efficient and smooth stapling

operation. If a staple jam occurs more frequently

than usual, or abnormal stapling occurs during

operation of the machine, follow the steps above

to remove the Staple Pusher and check if it is

scratched or worn out. To purchase a new Staple

Pusher, contact ourselves. Then, follow the steps

as above to replace the Staple Pusher.